Dlubal RX TIMBER v2.36.01

Dlubal RX-TIMBER 屋顶 2 是一个独立的程序，可以按照 EN 1995-1-1 对单坡和双坡屋顶进行承载能力极限状态和正常使用极限状态以及耐火设计。

Overview of Dlubal RX-TIMBER Roof 2 Benefits
Dlubal RX-TIMBER 屋面 2 优点概述

There are various options available for modeling a roof in Dlubal RX-TIMBER Roof. Graphical representations facilitate the geometry input. Modifications are updated automatically.
在 Dlubal RX-TIMBER 屋顶中有多种屋顶建模选项。图形表示有助于几何图形输入。修改会自动更新。

In addition, it is possible to consider cross‑section weakening on supports. Optionally, you can define if the design of support pressure on the rafter side should be performed.
此外，还可以考虑支座上的截面弱化。或者，您可以定义是否应在椽侧进行支座压力设计。

In RX-TIMBER Roof, the following calculation settings are possible:
在 RX-TIMBER 屋顶中，可以进行以下计算设置：

Selection of the designs to be performed (ULS, SLS, fire resistance)
选择要执行的设计（ULS、SLS、耐火性）
Determination of displaying support forces and deformations
确定显示支座反力和变形
Adjusting the recommended limit values for the serviceability limit state
调整正常使用极限状态的建议极限值
Specification of parameters for the fire resistance design to be performed in compliance with the simplified method
按照简化方法进行抗火设计的参数规范
Increasing strengths according to EN 1995‑1‑1, Clause 3.2
按照 EN 1995-1-1 第 3.2 条增加强度

Overview of Dlubal RX-TIMBER Roof 2 Features
Dlubal RX-TIMBER 屋面 2 功能概述

Design of the following roof types: Flat roof, monopitch roof, Duopitch roof (symmetrical/asymmetrical)
设计以下屋顶类型：平屋顶、单坡屋顶、双坡屋顶（对称/不对称）
Definition of any additional support and free selection of degrees of freedom (additional free definition of translational and rotational spring stiffness of supports and releases)
定义任何附加支座并自由选择自由度（附加自由定义支座和释放装置的平移和旋转弹簧刚度）
Arrangement of up to five collar/tie beams, including intermediate support for duo pitch roof
布置多达五个领梁/系梁，包括双坡屋顶的中间支撑
Automatic generation of wind and snow loads
自动生成风荷载和雪荷载
Automatic generation of required combinations for the ultimate and serviceability limit state as well as fire resistance design (additional definition of several member and nodal loads)
自动生成承载能力极限状态和正常使用极限状态以及抗火设计所需的组合（附加定义多个杆件和节点荷载）
Simple geometry input with illustrative graphics
带有说明性图形的简单几何图形输入
The input of tapered cantilevers with cut-to-grain on the bottom side of rafters
椽子底部带有切粒的锥形悬臂的输入
An extensive material library that user-defined materials can extend
用户自定义材质可以扩展的扩展材质库
Determination of design ratios, support forces, and deformations
确定设计利用率、支座反力和变形
Color reference scales in results tables
结果表中的色标比例
Direct data export to MS Excel
直接将数据导出到 MS Excel
DXF interface for preparation of production documents in CAD
DXF 接口，用于在 CAD 中准备生产文件
Program languages: English, German, Czech, Italian, Spanish, French, Portuguese, Polish, and Russian
程序语言：英语、德语、捷克语、意大利语、西班牙语、法语、葡萄牙语、波兰语和俄语
Verifiable printout report with all required designs available in many languages, for example, English, German, French, Italian, Spanish, Russian, Czech, Polish, Portuguese, Dutch
可验证的打印报告，包含多种语言的所有必需设计，例如英语、德语、法语、意大利语、西班牙语、俄语、捷克语、波兰语、葡萄牙语、荷兰语